Datasheet4U Logo Datasheet4U.com

UTXB0104 - 4-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR

Datasheet Summary

Description

The UTC UTXB0104 is 4-bit non-inverting translator uses two separate configurable power-supply rails.

The A port is designed to track VCCA.

VCCA accepts any supply voltage from 1.2V to 3.6V.

Features

  • S.
  • 1.2V to 3.6V on A Port and 1.65V to 5.5V on B Port (VCCA ≤ VCCB).
  • VCC Isolation Feature.
  • If Either VCC Input Is at GND, All Outputs Are in the High-Impedance State.
  • OE Input Circuit Referenced to VCCA.
  • Low Power Consumption, 5μA Max ICC.
  • IOFF Supports Partial-Power-Down Mode Operation.

📥 Download Datasheet

Datasheet preview – UTXB0104

Datasheet Details

Part number UTXB0104
Manufacturer UTC
File Size 308.23 KB
Description 4-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR
Datasheet download datasheet UTXB0104 Datasheet
Additional preview pages of the UTXB0104 datasheet.

📁 Similar Datasheet

  • UTX105 - RECTIFIERS (Microsemi Corporation)
  • UTX105 - FAST RECOVERY RECTIFIERS (Digitron Semiconductors)
  • UTX110 - RECTIFIERS (Microsemi Corporation)
  • UTX110 - FAST RECOVERY RECTIFIERS (Digitron Semiconductors)
  • UTX115 - RECTIFIERS (Microsemi Corporation)
  • UTX115 - FAST RECOVERY RECTIFIERS (Digitron Semiconductors)
  • UTX120 - RECTIFIERS (Microsemi Corporation)
  • UTX120 - FAST RECOVERY RECTIFIERS (Digitron Semiconductors)
  • UTX125 - RECTIFIERS (Microsemi Corporation)
  • UTX125 - FAST RECOVERY RECTIFIERS (Digitron Semiconductors)
Other Datasheets by UTC
  • UTXS0102 - 2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR
  • UTXS0104 - 4-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR

Full PDF Text Transcription

Click to expand full text
UNISONIC TECHNOLOGIES CO., LTD UTXB0104 Preliminary 4-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR WITH AUTOMATIC DIRECTION SENSING  DESCRIPTION The UTC UTXB0104 is 4-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2V to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from State 1.65V to 5.5V. This allows for universal low Voltage bidirectional translation between any of the 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, and 5V voltage nodes. VCCA should not exceed VCCB. When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.
Published: |