UM202EEPE Datasheet | Union Semiconductor

UM202EEx E High ESD-Protected, Fail-Safe, Single Supply RS-232 Transceivers UM202EESE SOP16 UM202EEPE DIP16 UM202EEUE TSSOP16 General Description The UM202EEx E series are low power single supply RS232 interface. The device consists of two line drivers, two line receivers, and dual charge pump circuit. The device meets the requirements of TIA/EIA-232 standard and provides the electrical interface between an asynchronous munication controller and the serial-port connector. The on chip charge pump and four small external capacitors act as onboard DC to DC converter, allow chip operated from single 5V supply, eliminating the need for ±10V power supplies, reduce cost and board space. The device operates at data signaling rates over 250Kbps. The slew rate of driver is set internally less than 30V/μs and the receivers feature internal noise filtering, eliminating the need for external slew rate and filter capacitors for reliable operation. The driver inputs and receiver outputs are TTL and CMOS patible. UM202EEx E es in 16 pin DIP, SOP and TSSOP packages, operating over the mercial and industrial temperature ranges. The ESD tolerance has been upgraded on these devices to over ±15k V for both Human Body Model and IEC61000-4-2 Air Discharge Method, without latch-up. The device operates with four 0.1μF capacitors, reduce system cost and board space. Applications Features z Notebook and Palmtop puters z Battery-Powered Equipment z Hand-Held Equipment z POS Terminal z ESD Protection for RS-232 Bus Pins up to ±15k V Human Body Model z Single +5V Power Supply z Low Power, ICC 15m A Maximum z Operates up to 250kbps z Receiver Noise Filter z Latch-Up Performance Exceeds 200m A Ordering Information Part Number UM202EESE UM202EEPE UM202EEUE Temp. Range -40°C to +85°C -40°C to +85°C -40°C to +85°C Marking Code UM202EESE UM202EEPE UM202EEUE Package Type SOP16 DIP16 TSSOP16 Shipping Qty 2500pcs/13 Inch Tape & Reel 25pcs/Tube 3000pcs/13 Inch Tape &...