Datasheet4U Logo Datasheet4U.com

2206 - 2.5W Dual Audio Power Amp

General Description

The UTC 2206 is a monolithic integrated circuit consisting of a 2-channel power amplifier .It is suitable for stereo and bridge amplifier application of radio cassette tape recorders.

Key Features

  • S.
  • High output power Stereo:PO=2.3W(Typ) at VCC=9V,RL=4Ω. Bridge: PO=4.7W(Typ) at VCC=9V,RL=8Ω.
  • Low switching distortion at high frequency.
  • Small shock noise at the time of power on/off due to a built-in muting circuit.
  • Good ripple rejection due to a built-in ripple filter.
  • Good channel separation.
  • Closed loop voltage gain fixed 45dB(Bridge: 51dB) but availability with external resistor added.
  • Minimum number of external parts required.
  • Easy to design radiat.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
2206CP XR-2206 Exar Corporation
2206FM TV2206FM Dynex Semiconductor
2200 T-1SubminiatureLamps GilwayTechnicalLamp
2200R MiniatureRadialLeadInductors C&DTechnologies
2202S SINGLE COLOR LED Stanley

Other Datasheets by Unisonic Technologies

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD 2206 LINEAR INTEGRATED CIRCUIT 2.5W DUAL AUDIO POWER AMP  DESCRIPTION The UTC 2206 is a monolithic integrated circuit consisting of a 2-channel power amplifier .It is suitable for stereo and bridge amplifier application of radio cassette tape recorders.  FEATURES *High output power Stereo:PO=2.3W(Typ) at VCC=9V,RL=4Ω. Bridge: PO=4.7W(Typ) at VCC=9V,RL=8Ω. *Low switching distortion at high frequency. *Small shock noise at the time of power on/off due to a built-in muting circuit *Good ripple rejection due to a built-in ripple filter. *Good channel separation. *Closed loop voltage gain fixed 45dB(Bridge: 51dB) but availability with external resistor added. *Minimum number of external parts required . *Easy to design radiator fin.