Datasheet4U Logo Datasheet4U.com

3511 - PC Power Supply Supervisors

Datasheet Summary

Description

The UTC 3511 is designed to provide the voltage, and current supervisor function, power good output (PGO), fault protection latch (FPL_N), and protection detector function (PDON_N) control for switching power systems.

Features

  • S.
  • Over Voltage Detector (OVD) for 3.3V, 5V, 12V.
  • Under Voltage Detector (UVD) for 3.3V, 5V.
  • Open Drain Output for PGO and FPL_N.
  • 300 ms power good delay.
  • 75 ms delay for 3.3V and 5V turn on.
  • 38 ms PDON_N control De-bounce.
  • 2.4 ms PDON_N control to FPL_N turn-off delay.
  • De-bounce time 73 μs for UVD/OVD.
  • Wide supply voltage range from 4V ~ 15V.

📥 Download Datasheet

Datasheet preview – 3511

Datasheet Details

Part number 3511
Manufacturer Unisonic Technologies
File Size 225.06 KB
Description PC Power Supply Supervisors
Datasheet download datasheet 3511 Datasheet
Additional preview pages of the 3511 datasheet.

📁 Similar Datasheet

  • 3510 - Stainless Steel Shear Beam Load Cell (VPG)
  • 3510 - (3510x) Three Phase Bridge (VMI)
  • 3510 - PC POWER SUPPLY SUPERVISORS (UTC)
  • 3510A - N-Channel MOSFET (KIA)
  • 3510F - (3510x) Three Phase Bridge (VMI)
  • 3510UF - (3510x) Three Phase Bridge (VMI)
  • 3512 - PC POWER SUPPLY SUPERVISORS (UTC)
  • 3515 - RATIOMETRIC/ LINEAR HALL-EFFECT SENSORS FOR HIGH-TEMPERATURE OPERATION (Allegro MicroSystems)
  • 3515A - PC POWER SUPPLY SUPERVISOR (UTC)
  • 3516 - Linear Hall-effect Sensors (Allegro Micro Systems)
Other Datasheets by Unisonic Technologies
  • 3513 - PC POWER SUPPLY SUPERVISOR

Full PDF Text Transcription

Click to expand full text
UNISONIC TECHNOLOGIES CO., LTD 3511 PC POWER SUPPLY SUPERVISORS  DESCRIPTION The UTC 3511 is designed to provide the voltage, and current supervisor function, power good output (PGO), fault protection latch (FPL_N), and protection detector function (PDON_N) control for switching power systems. For supervisor function, it provides the over voltage detector (OVD) monitoring for 3.3V, 5V, 12V; the under voltage detector (UVD) monitoring for 3.3V, 5V. When 3.3V or 5V voltage is decreasing to 2.69V, 4.3V respectively, the under voltage detector (UVD) function will be enabled to reset the PGO signal from high to low,and the FPL_N is latched HIGH. When 3.3V, 5V or 12V voltage is increasing to 3.9V, 6.1V or 13.
Published: |