Datasheet4U Logo Datasheet4U.com

3513 - PC POWER SUPPLY SUPERVISOR

Datasheet Summary

Description

PSONB control for PC switching power supply systems.

Features

  • S.
  • OVP/UVP monitors 3.3V, 5V, 12V input voltage level.
  • OCP monitors IS33, IS5, IS12 input current sense.
  • Fault protection output (FPOB) with Open Drain Output stage.
  • Power good output (PGO) with Open Drain Output stage.
  • 38ms de-bounce time for PSONB input signal.
  • 300ms time delay from PGI to PGO.
  • 2.4ms time delay for PSONB to turn off FPOB.

📥 Download Datasheet

Datasheet preview – 3513

Datasheet Details

Part number 3513
Manufacturer Unisonic Technologies
File Size 381.79 KB
Description PC POWER SUPPLY SUPERVISOR
Datasheet download datasheet 3513 Datasheet
Additional preview pages of the 3513 datasheet.

📁 Similar Datasheet

  • 3510 - Stainless Steel Shear Beam Load Cell (VPG)
  • 3510 - (3510x) Three Phase Bridge (VMI)
  • 3510 - PC POWER SUPPLY SUPERVISORS (UTC)
  • 3510A - N-Channel MOSFET (KIA)
  • 3510F - (3510x) Three Phase Bridge (VMI)
  • 3510UF - (3510x) Three Phase Bridge (VMI)
  • 3512 - PC POWER SUPPLY SUPERVISORS (UTC)
  • 3515 - RATIOMETRIC/ LINEAR HALL-EFFECT SENSORS FOR HIGH-TEMPERATURE OPERATION (Allegro MicroSystems)
  • 3515A - PC POWER SUPPLY SUPERVISOR (UTC)
  • 3516 - Linear Hall-effect Sensors (Allegro Micro Systems)
Other Datasheets by Unisonic Technologies
  • 3511 - PC Power Supply Supervisors

Full PDF Text Transcription

Click to expand full text
UNISONIC TECHNOLOGIES CO., LTD 3513 PC POWER SUPPLY SUPERVISOR CMOS IC  DESCRIPTION The UTC 3513 is designed to provide protection circuits, power DIP-16 good output (PGO) indicator, fault protection output (FPOB) and a PSONB control for PC switching power supply systems. The protection circuits include over voltage protection (OVP), under voltage protection (UVP) and over current protection(OCP) monitoring for 3.3V, 5V and two 12V. When 3.3V, 5V or 12V voltage is decreasing to 2.68V, 4.3V and 9.9V respectively, the under voltage protection (UVP) function will be SOP-16 enabled. FPO will be set to high to turn off the PWM controller IC. Toggling the PSONB from low to high will reset the fault protection latch.
Published: |