Datasheet4U Logo Datasheet4U.com

MC33178 - LOW POWER OPERATIONAL AMPLIFIERS

General Description

The UTC MC33178 is a Bipolar dual operational amplifier with high performance concepts.

Its all NPN output stage exhibits no deadband crossover distortion, large output voltage swing, and an excellent phase and gain margin.

Key Features

  • S.
  • Dual supply operation from ±2V to ±18V.
  • High slew rate: 2.0V/µs.
  • Large output voltage swing.
  • 600Ω output drive capability.
  • Low offset voltage: 0.15mV (Mean).
  • Low total harmonic distortion: 0.0024% (@ 1.0 kHz w/600Ω load).
  • High gain bandwidth: 5.0MHz.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC33178 HIGH OUTPUT CURRENT LOW POWER / LOW NOISE OPERATIONAL AMPLIFIERS Motorola
MC33178 Low Noise Operational Amplifiers ON Semiconductor
MC33170 RF Amplifier Companion Chip for Dual-Band Cellular Subscriber Terminal ON Semiconductor
MC33171 (MC33172/MC33174) Low Power / Single Supply Operational Amplifiers Motorola
MC33171 Low Power Operational Amplifiers ON Semiconductor

Other Datasheets by Unisonic Technologies

Part Number Description
MC33078 DUAL LOW NOISE OPERATIONAL AMPLIFIERS
MC33272 LOW INPUT OFFSET VOLTAGE OPERATIONAL AMPLIFIERS
MC34063 DC to DC Converter Controller
MC34118 VOICE SWITCHED SPEAKER-PHONE CIRCUIT

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD MC33178 LINEAR INTEGRATED CIRCUIT HIGH OUTPUT CURRENT LOW NOISE, LOW POWER OPERATIONAL AMPLIFIERS  DESCRIPTION The UTC MC33178 is a Bipolar dual operational amplifier with high performance concepts. Its all NPN output stage exhibits no deadband crossover distortion, large output voltage swing, and an excellent phase and gain margin. It also provides a low open loop high frequency output impedance with symmetrical source and sink AC frequency performance. This device use of high frequency PNP input transistors to produce amplifiers exhibiting low input offset voltage, noise and distortion.  FEATURES * Dual supply operation from ±2V to ±18V * High slew rate: 2.0V/µs * Large output voltage swing * 600Ω output drive capability * Low offset voltage: 0.