Datasheet4U Logo Datasheet4U.com

PA7469 - STEREO 2.6W AUDIO POWER AMPLIFIER

Datasheet Summary

Description

As an audio power amplifier, UTC PA7469 can provides precise DC volume control, and a stereo bridged audio power amplifiers capable of producing 2.6Ω(1.8W) into 4W with less than 10% (1.0%)THD+N.

Features

  • Low operating current: 9mA.
  • Two output modes allowable with BTL and SE modes selected by SE/BTL pin.
  • Low current consumption in shutdown mode :1μA.
  • Short circuit protection.
  • Thermal shutdown protection and over current protection circuitry.
  • Improved depop circuitry to eliminate turn-on and turn-off transients in outputs.
  • Very high PSRR.
  • 32 Steps volume adjustable.
  • BTL mode: 2.6W per channel output power into 4Ω Load at 5V.

📥 Download Datasheet

Datasheet preview – PA7469

Datasheet Details

Part number PA7469
Manufacturer Unisonic Technologies
File Size 313.37 KB
Description STEREO 2.6W AUDIO POWER AMPLIFIER
Datasheet download datasheet PA7469 Datasheet
Additional preview pages of the PA7469 datasheet.
Other Datasheets by Unisonic Technologies

Full PDF Text Transcription

Click to expand full text
UNISONIC TECHNOLOGIES CO., LTD PA7469 STEREO 2.6W AUDIO POWER AMPLIFIER (WITH DC_VOLUME CONTROL) CMOS IC „ DESCRIPTION As an audio power amplifier, UTC PA7469 can provides precise DC volume control, and a stereo bridged audio power amplifiers capable of producing 2.6Ω(1.8W) into 4W with less than 10% (1.0%)THD+N. In UTC PA7469, the attenuator range of the volume control is from 20dB (DC_Vol=0V) to -80dB (DC_Vol=3.54V) with 32 steps. It also includes both of the depop circuitry and the thermal shutdown protection circuitry which can reduce pops and clicks noise during power up or shutdown mode operation. It also improves the power off pop noise and has the parts to not been destroyed by over temperature and short current failure.
Published: |