Datasheet4U Logo Datasheet4U.com

U74CBTLV3125 - LOW-VOLTAGE QUADRUPLE FET BUS SWITCH

Datasheet Summary

Description

The U74CBTLV3125 quadruple FET bus switch

Features

  • S.
  • 5-Ω Switch Connection Between Two Ports.
  • Standard ‘125-Type Pinout.
  • Isolation Under Power-Off Conditions.

📥 Download Datasheet

Datasheet preview – U74CBTLV3125

Datasheet Details

Part number U74CBTLV3125
Manufacturer Unisonic Technologies
File Size 257.92 KB
Description LOW-VOLTAGE QUADRUPLE FET BUS SWITCH
Datasheet download datasheet U74CBTLV3125 Datasheet
Additional preview pages of the U74CBTLV3125 datasheet.

📁 Similar Datasheet

  • U74CBTLV3245 - LOW-VOLTAGE OCTAL FET BUS SWITCH (UTC)
  • U74CBTLV3251 - LOW-VOLTAGE 1-OF-8 FET MULTIPLEXER/DEMULTIPLEXER (UTC)
  • U74CBTLV3253 - LOW-VOLTAGE DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER (UTC)
  • U74CBTLV3257 - LOW-VOLTAGE DUAL 4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER (UTC)
  • U74CBT3251C - 1-OF-8 FET MULTIPLEXER/DEMULTIPLEXER (UTC)
  • U74CBT3253C - DUAL 1-OF-4 FET MULTIPLEXER/EMULTIPLEXER (UTC)
  • U74CBT3257C - 4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER (UTC)
  • U74CB3Q3244 - 8-BIT FET BUS SWITCH (UTC)
  • U74CB3Q3257 - LOW-VOLTAGE HIGH BANDWIDTH BUS SWITCH (UTC)
  • U74CB3Q3305 - DUAL FET BUS SWITCH 2.5V OR 3.3V LOW-VOLTAGE HIGH-BANDWIDTH BUS SWITCH (UTC)
Other Datasheets by Unisonic Technologies

Full PDF Text Transcription

Click to expand full text
UNISONIC TECHNOLOGIES CO., LTD U74CBTLV3125 LOW-VOLTAGE QUADRUPLE FET BUS SWITCH CMOS IC  DESCRIPTION The U74CBTLV3125 quadruple FET bus switch features independent line switches. Each switch is disabled when the associated output-enable ( OE ) input is high. The device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Published: |