Datasheet4U Logo Datasheet4U.com

UC3380 - PWM STEP UP DC-DC CONTROLLER

General Description

The UC3380 is PWM step up DC-DC switching controller that operates from 0.9V.

The low start up input voltage makes UC3380 specially designed for powering portable equipment from one or two cells battery packs.

Key Features

  • S.
  • 0.9V Low Start-Up Input Voltage at 1mA Load.
  • Low Operation Current.
  • 0.5uA Low Shutdown Current.
  • Fix Frequency PWM at 300KHZ.
  • Built in PWM Switching Control Circuit ,Duty Ratio is 0~78%.
  • Output Voltage:0.1V Step Setting is Available Between 2.0V and 6.5V.
  • Soft Start Time: 3ms.
  • Shutdown Function.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD UC3380 PWM STEP UP DC-DC CONTROLLER CMOS IC „ DESCRIPTION The UC3380 is PWM step up DC-DC switching controller that operates from 0.9V. The low start up input voltage makes UC3380 specially designed for powering portable equipment from one or two cells battery packs. This device consist of a soft start circuit, a reference voltage source, an error amplifier, an oscillator, a phase compensation, a PWM controller and an output drive circuit for driving external power transistor. Additionally, a chip enable feature is provided to power down the converter for extended battery life. The device features a voltage mode PWM control loop, providing stable and high efficiency operation over a broad load current range. „ FEATURES * 0.