Datasheet4U Logo Datasheet4U.com

ULV1546 - 20V HIGH CURRENT DRIVE RAIL-TO-RAIL VCOM/GAMMA BUFFER

General Description

The UTC ULV1546 is the quadruple high voltage rail-to-rail Vcom/Gamma Buffer with low power dissipation.

Operating on power supplies ranging from 5V to 20V, while current consuming is less than 1.2mA / per amplifier.

Key Features

  • Wide Supply Operation Range +5V~+20V.
  • Beyond the rails input capability.
  • Rail-to-rail output swing.
  • Low supply current, 1.2mA per amplifier (typical).
  • Wide bandwidth (unit gain) 30MHz-3dB bandwidth.
  • 300mA peak output AC current (typ. ).
  • High slew rate=30V/µs.
  • Unity-gain stable.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ULV1012 PRE-AMPLIFIED UTC
ULV2333 RAIL-TO-RAIL INPUT/OUTPUT CMOS DUAL OPERATIONAL AMPLIFIERS UTC
ULV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS UTC
ULV2702 NANOPOWER OPERATIONAL AMPLIFIERS AND PUSH-PULL COMPARATORS UTC
ULV333 RAIL-TO-RAIL INPUT/OUTPUT CMOS SINGLE OPERATIONAL AMPLIFIERS UTC

Other Datasheets by Unisonic Technologies

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD ULV1546 Preliminary 20V HIGH CURRENT DRIVE RAIL-TO-RAIL VCOM/GAMMA BUFFER CMOS IC  DESCRIPTION The UTC ULV1546 is the quadruple high voltage rail-to-rail Vcom/Gamma Buffer with low power dissipation. Operating on power supplies ranging from 5V to 20V, while current consuming is less than 1.2mA / per amplifier. Rail-to-rail output capability and common mode input ability beyond the rails enable these amplifiers to offer maximum dynamic range at any supply voltage. Fast slew rate and settling times, and a high output drive capability of 300mA peak AC current (sink and source) are also provided by UTC ULV1546.