Datasheet4U Logo Datasheet4U.com

UZ1086 - 1.5A ADJUSTABLE/FIXED LOW DROPOUT LINEAR REGULATOR

General Description

The UTC UZ1086 adjustable and UZ1086-1.2V, 1.8V, 2.5V, 2.85V, 3.3V and 5V are low dropout three-terminal regulators with 1.5A output current capability.

These devices have been optimized for low voltage where transient response and minimum input voltage are critical.

Key Features

  • S 1 TO-263 1 TO-252 1 TO-263-3 1 SOT-223.
  • Low dropout voltage.
  • Load regulation: 0.05% typical.
  • Trimmed current limit.
  • On-chip thermal limiting.
  • Three-terminal adjustable or fixed 1.2V, 1.8V, 2.5V, 2.85V, 3.3V, 5V.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UZ10BSA Low reverse leakage / Low zener impedance Dachang Electronic
UZ10BSB Low reverse leakage / Low zener impedance Dachang Electronic
UZ110 POWER ZENERS Microsemi Corporation
UZ110 3 WATT ZENER DIODES Digitron Semiconductors
UZ110HR2 POWER ZENERS Microsemi Corporation

Other Datasheets by Unisonic Technologies

Part Number Description
UZ1084 5A ADJUSTABLE/FIXED LOW DROPOUT LINEAR REGULATOR
UZ1085 LINEAR INTEGRATED CIRCUIT

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD UZ1086 LINEAR INTEGRATED CIRCUIT 1.5A ADJUSTABLE/FIXED LOW DROPOUT LINEAR REGULATOR  DESCRIPTION 11 TO-220 TO-220F1 The UTC UZ1086 adjustable and UZ1086-1.2V, 1.8V, 2.5V, 2.85V, 3.3V and 5V are low dropout three-terminal regulators with 1.5A output current capability. These devices have been optimized for low voltage where transient response and minimum input voltage are critical. The 2.85V version is designed specifically to be used in Active Terminators for SCSI bus. Current limit is trimmed to ensure specified output current and controlled short-circuit current. On-chip thermal limiting provides protection against any combination of overload and ambient temperatures that would create excessive junction temperatures.