EKZE350ExxxxxMxxxx Datasheet | United Chemi-Con

.Data Sheet.in MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Upgrade! KZH Lower Z Low impedance, 105C @Ultra Low impedance for Personal puter and Storage Equipment @Endurance with ripple current: 105C 1000 to 5000 hours @Non solvent-proof type @Pb-free design KZE lower Z KY ?SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tane) Low Temperature Characteristics (Max. Impedance Ratio) Endurance -40 to +105C 6.3 to 100Vdc P20% (M) I=0.01CV or 3MA, whichever is greater. Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tan E (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08 When nominal capacitance exceeds 1000MF, add 0.02 to the value above for each 1000MF increase. Z (-25C) / Z (+20C) 2max. Z (-40C) / Z (+20C) 3max. (at 20C, 120Hz) (at 20C after 2 minutes) Characteristics (at 20C, 120Hz) Shelf Life (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated ripple current is applied for the specified period of time at 105C. Time 7L : 1000hours F5 & F6.3 : 2000hours F8 : 3000hours F10 : 4000hours F12.5 & F16 : 5000hours Capacitance change [P25% of the initial value D.F. (tan E) [200% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 500 hours at 105C without voltage applied. Capacitance change [P25% of the initial value D.F. (tan E) [200% of the initial specified value Leakage current [The initial specified value ?DIMENSIONS [mm] @Terminal Code : E FP0.5 FP0.5 Fd Sleeve (PET) 16, 18 8 6.3 f D 10, 12.5 5 0.45 0.45 0.45 7L 0.6 0.8 11LK 0.5 0.5 0.6 F 2.0 2.5 3.5 5.0 7.5 FD+0.5max. f D' L+1.5max.(7L : L+1.0max.) L' FD' fd Vent (Except 7L & F5 & F6.3) L' 15min 4min (F5 to...