UCC1895 - BiCMOS Advanced Phase Shift PWM Controller

Product Overview

Unitrode

Datasheet Details

Part number	UCC1895
Manufacturer	Unitrode
File Size	167.31 KB
Description	BiCMOS Advanced Phase Shift PWM Controller
Datasheet	UCC1895 Datasheet
Additional preview pages of the UCC1895 datasheet.

Product details

Description

The UCC3895 is a phase shift PWM controller that implements control of a full-bridge power stage by phase shifting the switching of one half-bridge with respect to the other.

Features

Programmable Output Turn-on Delay.
Adaptive Delay Set.
Bidirectional Oscillator Synchronization.
Capability for Voltage Mode or Current Mode Control.
Programmable Soft Start/Soft Stop and Chip Disable via a Single Pin.
0% to 100% Duty Cycle Control.
7MHz Error Amplifier.
Operation to 1MHz.
Low Active Current Consumption (5mA Typical @ 500kHz).
Very Low Current Consumption During Undervoltage Lock-out (150µ.

📁 Similar Datasheet

UCC1800 - Low-Power BiCMOS Current-Mode PWM Controllers (Texas Instruments)
UCC1801 - Low-Power BiCMOS Current-Mode PWM Controllers (Texas Instruments)
UCC1802 - Low-Power BiCMOS Current-Mode PWM Controllers (Texas Instruments)
UCC1803 - Low-Power BiCMOS Current-Mode PWM Controllers (Texas Instruments)
UCC1804 - Low-Power BiCMOS Current-Mode PWM Controllers (Texas Instruments)
UCC1805 - Low-Power BiCMOS Current-Mode PWM Controllers (Texas Instruments)
UCC1806 - CURRENT-MODE PWM CONTROLLER (Texas Instruments)
UCC1837 - 8-Pin N-FET Linear Regulator Controller (UNITRODE)

Other Datasheets by Unitrode

UCC1807-1 - Programmable Maximum Duty Cycle PWM Controller
UCC1807-2 - Programmable Maximum Duty Cycle PWM Controller
UCC1807-3 - Programmable Maximum Duty Cycle PWM Controller
UCC1808-1 - Low Power Current Mode Push-Pull PWM
UCC1808-2 - Low Power Current Mode Push-Pull PWM
UCC1809-1 - Economy Primary Side Controller

Published: Sep 19, 2015 |