Datasheet4U Logo Datasheet4U.com

UCC3583 - (UCC1583 - UCC3583) Switch Mode Secondary Side Post Regulator

General Description

The UCC3583 is a synchronizable secondary side post regulator for precision regulation of the auxiliary outputs of multiple output power supplies.

Key Features

  • Precision Secondary Side Post Regulation for Multiple Output Power Supplies.
  • Useful for Both Single Ended and Center Tapped Secondary Circuits.
  • Ideal Replacement for Complex Magnetic Amplifier Regulated Circuits.
  • Leading Edge Modulation.
  • Does Not Require Gate Drive Transformer.
  • High Frequency (>500kHz) Operation.
  • Applicable for Wide Range of Output Voltages.
  • High Current Gate Driver (0.5A Sink/1.5A Source).
  • Average.

📥 Download Datasheet

Datasheet Details

Part number UCC3583
Manufacturer Unitrode
File Size 1.27 MB
Description (UCC1583 - UCC3583) Switch Mode Secondary Side Post Regulator
Datasheet download datasheet UCC3583 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UCC3580-1 Single Ended Active Clamp/Reset PWM Texas Instruments
UCC3580-2 Single Ended Active Clamp/Reset PWM Texas Instruments
UCC3580-3 Single Ended Active Clamp/Reset PWM Texas Instruments
UCC3580-4 Single Ended Active Clamp/Reset PWM Texas Instruments
UCC3585 Low Voltage Synchronous Buck Controller Texas Instruments

Other Datasheets by Unitrode

Part Number Description
UCC3581 Micropower Voltage Mode PWM
UCC35701 Advanced Voltage Mode Pulse Width Modulator
UCC35702 Advanced Voltage Mode Pulse Width Modulator
UCC3750 Source Ringer Controller
UCC3807-1 Programmable Maximum Duty Cycle PWM Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Switch Mode Secondary Side Post Regulator UCC1583 UCC2583 UCC3583 FEATURES • Precision Secondary Side Post Regulation for Multiple Output Power Supplies • Useful for Both Single Ended and Center Tapped Secondary Circuits • Ideal Replacement for Complex Magnetic Amplifier Regulated Circuits • Leading Edge Modulation • Does Not Require Gate Drive Transformer • High Frequency (>500kHz) Operation • Applicable for Wide Range of Output Voltages • High Current Gate Driver (0.5A Sink/1.5A Source) • Average Current Limiting Loop DESCRIPTION The UCC3583 is a synchronizable secondary side post regulator for precision regulation of the auxiliary outputs of multiple output power supplies.