MT10A Datasheet | VOLGEN

Features - 10 WATTS OUTPUT POWER - OUTPUT CURRENT UP TO 2.5A - STANDARD 2.0 X 1.0 X 0.4 INCH PACKAGE - HIGH EFFICIENCY UP TO 87% - 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE - SIX-SIDED CONTINUOUS SHIELD - FIXED SWITCHING FREQUENCY (300KHz) - ISO9001 CERTIFIED MANUFACTURING FACILITIES - PLIANT TO Ro HS EU DIRECTIVE 2002/95/EC DESCRIPTION The MT10A and MT10A-W series offer 10 watts of output power from a 2.0 x 1.0 x 0.4 inch package. MT10A series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. MT10A-W series have 4:1 ultra wide input voltage of 9-36 and 18-75VDC. T E C H N I C A L S P E C I F I C AT I O N OUTPUT SPECIFICATIONS Output power Voltage accuracy Minimum load Line regulation LL to HL at Full Load Full load and nominal Vin All specifications are typical at nominal input, full load and 25ºC otherwise noted. INPUT SPECIFICATIONS 10 Watts, max. ± 1% 0% Input filter Input surge voltage 100m S max 12V input 24V input 48V input Input voltage range MT10A-W MT10A 12V nominal input 24V nominal input 48V nominal input 24V nominal input 48V nominal input 9 - 18VDC 18 - 36VDC 36 - 75VDC 9 - 36VDC 18 - 75VDC Pi type 36VDC 50VDC 100VDC ± 0.2% Single ± 0.5% Load regulation No Load to Full Load Dual ± 1% Cross regulation(Dual) Asymmetrical load 25% / 100% FL ± 5% Single Ripple and noise 20MHz bandwidth See table Dual ± 0.02% / ºC, max. Temperature coefficient Transient response recovery time 25% load step change 3.3V output Over voltage protection 5V output Zener diode clamp 12V output 15V output Over load protection % of FL at nominal input Short circuit protection 250µS 3.9VDC 6.2VDC 15VDC 18VDC 150%, max. Hiccup, automatics recovery Input reflected ripple current Nominal Vin and full load 30m Ap-p Nominal Vin and Start up time Power up 20m S, typ. constant resistive load Remote ON/OFF (Option) (Note 6) (Positive logic) DC-DC ON Open or 3.5V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V (Negative logic) DC-DC ON Short or 0V < Vr < 1.2V DC-DC OFF Open or 3.5V <...