TFS121B Datasheet | Vectron International

Filename: tfs 121b.doc Version 1.5 VI TELEFILTER Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 50 Ω 50 Ω °C d Bm Filter specification TFS 121B 1/5 Characteristics Remark: The reference level for the relative attenuation arel of the TFS 121B is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the d B filter attenuation level relative to the insertion loss ae. The nominal frequency f N is fixed at 121,5 MHz without any tolerance. The given values for both the relative attenuation arel and the group delay ripple have to be achieved at the frequencies given below even if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc. Data Insertion loss (reference level) Nominal frequency Passband Pass band ripple Bandwidth 1 3 d B d B arel MHz MHz MHz MHz BW ae typ. value 1,25 d B tolerance / limit max. 2,5 121,5 f N ± 25 d B MHz k Hz d B f N PB - max. ±0,5 2,8 min. MHz ± 25 - KHz Relative attenuation f N f N f N f N ± ± ± ± 2,20 3,00 5,00 8,00 MHz MHz MHz MHz … … … … f N f N f N f N ± ± ± ± 3,00 5,00 8,00 20,00 22 35 53 - d B d B d B min. min. min. min. max. 5 15 20 40 15 d B d B d B d B d Bm Input power level Operating temperature range Storage temperature range Temperature coefficient of frequency - ) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fcat(MHz). OTR TCf - -32 ppm/K - 40 °C ... + 85°C - 45 °C ... + 90°C Generated:...