VX-209 Datasheet | Vectron International

Features - - - - Hybrid Sinewave design Processed in accordance with MIL-PRF-55310D, Class S Frequency Range: 10 MHZ to 200 MHZ Previous Model: 487Y(HHHH) - Applications Performance Speci cations Parameter vs. operating temperature range (referenced to +25°C) Initial Tolerance vs. supply voltage change vs. load change vs. aging / 1 year vs. aging / year (following years) Min -25 -2.25 -2.0 -0.5 -3 -2 Typ Max +25 +2.25 +2.0 +0.5 +3 +2 Units Condition -20… +70°C at +25°C VS ± 5% Load ± 10% Frequency Stabilities ppm ppm ppm ppm ppm ppm Supply Voltage (Vs) Supply voltage Power consumption 14.25 15.0 15.75 50 RF Output Signal Output Power .. Output Power Harmonics Sub-Harmonics Spurious Short Term Stability 0 +7 -20 -30 -80 ±0.01 ±0.1 ±1.0 ±10 Sinewave d Bm d Bm d Bc d Bc d Bc ppb ppb ppb ppb 1 ms 10 ms 100 ms 1 sec 50 Ohm load 50 Ohm load VDC m A Vectron International - 267 Lowell Road, Hudson, NH 03051 - Tel: 1-88-VECTRON-1 - http://.vectron. Performance Speci cations Parameter Tuning Range Linearity Tuning Slope Control Voltage Range 0.0 2.5 Min -60 Typ Max +60 10 Positive 5.0 Units ppm % Condition Frequency Tuning (EFC) Additional Parameters Crystal: ponents: Rework: Class “S” screened: 100% PIND testing: Group A & B: Salt Spray: Standard shock and vibration (survive; met by design, not tested): Swept quartz, AT, 3 point mount Class “S” Microelectronic element evaluation per Appendix B of MIL-PRF-55310D In accordance with MIL-PRF-55310D, Class S In accordance with MIL-PRF-55310D, Table III, including internal visual inspection per MIL-STD-883, Method 2017, and PIND testing In accordance with MIL-STD-883, Method 2020, Condition B. We may use a VI approved material as a “getter” in our manufacturing process to help pass PIND. 100% Group A and 100% Group B testing Salt spray/salt atmosphere not included in this speci cation. Shock: 100G, 6 ms per MIL-STD-202, Method 213, Condition C Vibration: Sine: 20G to 2 k Hz per MIL-STD-202, Method 204,...