PE255 Datasheet PDF | Vibro-Meter

Vibro-Meter PE255

The dynamic pressure transducer PE 255 is a low mass transducer with extended low and high frequency performances. The integral electronics eliminates the need for a charge converter and allows the use of up to several hundred meters of low-cost cable.

Part No.	PE255
Datasheet	PE255 Download
Manufacturer	Vibro-Meter
Description	Piezoelectric Pressure Transducer
Buy	Stock & Price

FEATURES

2 wire technique Hermetically sealed Frequency response: 0.3 Hz to 20,000 Hz Sensitivity 17 mV/bar (1.17 mV/psi) Temperature range: -253°C to +125°C : 6 g (US 5/16'') 18 g (Metric M10x1)

DESCRIPTION

Noise floor is an exceptional 20 µV broadband. WEIGHT SEAL (included) PN 443-255-903-011 19 5/16-24 UNF ∅ 6.33 -0.03 +0.00 +0.000 -0.015 10-32 UNF-2A ∅ 5.55 ∅6 8.5 +0.00 -0.10 12 HEX. 0.8 7 HEX. 0.3 (3.5) ∅12 Free Datasheet (7) (13.5) 31±0.5 (4.5) 9 -0.05 ∅11-0.10 M10x1 6 +0.00 -0.05 SPECIFICATIONS PE 255 Output impedance * - With 12 mA : 200 Ω - With 6 mA : 500 Ω Bias voltage * (over temperature range) - 8 to 14 VDC : 12 mA - 5 to 10 VDC : 6 mA Noise floor * : <35 µ V typical (12 mA) ENVIRONMENTAL Temperature range : -253°C to +125°C Shock acceleration : <2000 g peak (half sine,1 ms) Acoustic sensitivity (on connector side membrane isolated) Corrosion, humidity : Inconel X 750, hermetically welded Mounting : 5/16'' - 24 UNF thread, M10 x 1 adapter available CALIBRATION Dynamic calibration at factory at 20, 40, 60, 80 and 100 bar (+23°C).