PI2123 Datasheet | Vicor Corporation

Description The Cool-ORing PI2123 is a plete full-function Active ORing solution with a high-speed ORing MOSFET controller and a very low on-state resistance MOSFET designed for use in redundant power system architectures. The PI2123 Cool-ORing solution is offered in an extremely small, thermally enhanced 5mm x 7mm LGA package and can be used in high side Active ORing applications on bus voltages up to 9.6V. The PI2123 enables extremely low power loss with fast dynamic response to fault conditions, critical for high availability systems. A master/slave feature allows the paralleling of PI2123 solutions for high current Active ORing requirements. The PI2123, with its 3mΩ internal MOSFET provides very high efficiency and low power loss during steady state operation, while achieving high-speed turn-off of the internal MOSFET during input power source fault conditions that cause reverse current flow. The PI2123 provides an active low fault flag output to the system during excessive forward current, light load, reverse current, over-voltage, under-voltage and over-temperature fault conditions. A temperature sensing function indicates a fault if the maximum junction temperature exceeds 160°C. The under-voltage and over-voltage thresholds are .. programmable via external resistor dividers. Features - - - - - - - - - Integrated High Performance 15A, 3mΩ MOSFET Very-small, high density fully-optimized solution providing simple PCB layout. Fast Dynamic Response to Power Source failures, with 160ns reverse current turn-off delay time Accurate sensing capability to indicate system fault conditions Programmable under & over-voltage functions Over temperature fault detection Adjustable reverse current blanking timer Master/Slave I/O for paralleling Active low fault flag output Applications - - - - - N+1 Redundant Power Systems Servers & High End puting Tele Systems High-side Active ORing High current Active ORing ( ≤ 9.6Vbus) Package Information - 17-pin 5mm x 7mm...