VKS232 - LCD Driver

Description

9.6232 116×1/116×2 LCD STATIC DRIVER VKS232 is a RAM Mapping dual-mode LCD Driver,Select the display mode through the DS pin，It can support static LCD screens with a maximum of 116 pattern(116SEGx1COM), or dynamic LCD screens with a maximum of 232 pattern(116SEGx2COM), only 3 or 4 lines are requir

Features

Operating voltage:2.4-5.2V.
Built-in 256kHz RC oscillator（default）.
mode select by DS pin: mode0:Drive display point 116×2,dynamic,1/2bias 50%duty （DS=0） mode1:Drive display points116×1，static,no bias 100%duty（DS=1）.
Built-in 58×4 bit display RAM,Two ram mapping modes correspond to mode 0 and mode 1 respectively.

VinKa

📥 Download Datasheet

Datasheet Details

Part number	VKS232
Manufacturer	VinKa
File Size	4.18 MB
Description	LCD Driver
Datasheet	VKS232 Datasheet
Additional preview pages of the VKS232 datasheet.

📁 Similar Datasheet

Other Datasheets by VinKa

Full PDF Text Transcription

Click to expand full text

9.6232 116×1/116×2 LCD STATIC DRIVER Features • Operating voltage:2.4-5.2V • Built-in 256kHz RC oscillator（default） • mode select by DS pin: mode0:Drive display point 116×2,dynamic,1/2bias 50%duty （DS=0） mode1:Drive display points116×1，static,no bias 100%duty（DS=1） • Built-in 58×4 bit display RAM,Two ram mapping modes correspond to mode 0 and mode 1 respectively • STANDBY mode（by Cmd LCD OFF,SYS DIS） • 4 wire serial interface • Software configuration LCD parameters • Data mode and command mode instructions • Read/Write address auto increment • VLCD pin for adjusting LCD operating voltage（≤VDD） • Three data accessing modes • Package: LQFP128(14.0mm x 14.0mm PP=0.4mm) February 2020 Rev. 1.3 1/18 www.szvinka.com 1 General Description 9.

Published: Nov 2, 2024 |