DG186 Datasheet | Vishay

DG186/187/188 Vishay Siliconix High-Speed Drivers with SPDT JFET Switches .. Features D Constant On-Resistance Over Entire Analog Range D Low Leakage D Low Crosstalk D Rad Hardness BENEFITS D D D D D Low Distortion Eliminates Large Signal Errors High Precision High Bandwidth Capability Fault Protection APPLICATIONS D D D D D Audio Switching Video Switching Sample/Hold Guidance and Control Systems Telemetry DESCRIPTION The DG186/187/188 are precision single-pole, double-throw (SPDT) analog switches designed to provide accurate switching of video and audio signals. This series is ideally suited for applications requiring a constant on-resistance over the entire analog range. on-resistance include audio switching, video switching, and data acquisition. The major difference in the devices is the on-resistance (DG186- 10 W , DG187- 30 W , DG188- 75 W). Reduced errors are achieved through low leakage current (ID(on) < 2 n A). Applications which benefit from the flat JFET To achieve fast and accurate switch performance, each device prises two n-channel JFET transistors and a TTL patible bipolar driver. The driver is designed to achieve break-before-make switching action, eliminating the inadvertent shorting between channels and the crosstalk which would result. In the on state, each switch conducts current equally well in either direction. In the off condition, the switches will block up to 20 V peak-to-peak, with feedthrough of less than - 60 d B at 10 MHz. FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION NC NC NC D1 S1 IN V+ VL 1 2 3 4 5 6 7 Dual-In-Line Top View 14 13 12 11 10 9 8 NC NC D2 S2 NC V- NC D1 S1 IN V+ VL 1 2 3 4 5 6 7 Flat Package Top View 14 13 12 11 10 9 8 NC NC D2 S2 NC V- - VR IN 3 4 S1 2 D1 D2 10 1 9 S2 NC 8 7 Metal Can Top View 5 VL 6 VR V- - Refer to JAN38510 Information, Military Section VR V+ - MON TO SUBSTRATE AND CASE TRUTH...