IHD1EB153L Datasheet | Vishay

FEATURES - Printed circuit mounting (axial leads) - Protected by polyolefin tubing Ro HS - High saturation bobbin used allowing high PLIANT inductance with low DC resistance - Pre-tinned leads - High resistivity core offers very high parallel resistance, resulting in maximum coil performance - 20 sleeveless models available at reduced cost ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with no DC current Incremental Current: The typical current at which the inductance will be decreased by 5 % from its initial zero DC value Dielectric Rating: 2500 VRMS between winding and outer circumference to within 0.250" [6.35 mm] of the insulating sleeve edge Operating Temperature: - 55 °C to + 125 °C (no load) - 55 °C to + 85 °C (at full rated current) Current Rating: Maximum continuous Operating current (DC or RMS) based on a 40 °C temperature rise MECHANICAL SPECIFICATIONS Wire: Solid soft copper Terminals: 20 AWG tinned copper leads Coating: Polyolefin tubing - flame retardant UL type VW-1 per MIL-I-23053/5, Class 3 requirements Core Material: Ferrite DIMENSIONS in inches [millimeters] B Max. 1.13 [28.70] Min. Typ. A Dia. Max. 0.032 [0.813] Dia. Typ. #20 AWG MODEL IHD-1 IHD-3 A (Max.) 0.270 [6.85] 0.460 [11.68] B (Max.) 0.700 [17.78] 0.900 [22.86] STANDARD ELECTRICAL SPECIFICATIONS IND. DCR TOL. at 1 k Hz MAX. (µH) (Ohms) MODEL IHD-1 1.0 ± 15 % 0.009 1.2 ± 15 % 0.010 1.5 ± 15 % 0.011 1.8 ± 15 % 0.012 2.2 ± 15 % 0.013 2.7 ± 15 % 0.014 3.3 ± 15 % 0.016 3.9 ± 15 % 0.017 4.7 ± 15 % 0.022 5.6 ± 15 % 0.024 6.8 ± 15 % 0.026 8.2 ± 15 % 0.028 10.0 ± 15 % 0.033 12.0 ± 15 % 0.037 15.0 ± 15 % 0.040 18.0 ± 15 % 0.044 22.0 ± 15 % 0.050 27.0 ± 15 % 0.070 33.0 ± 15 % 0.075 39.0 ± 15 % 0.084 47.0 ± 15 % 0.104 Document Number: 34016 Revision: 27-Feb-06 RATED CURRENT (Max. Amps) 5.3 5.0 4.8 4.6 4.4 4.2 4.0 3.8 3.4 3.2 3.1 3.0 2.8 2.6 2.5 2.4 2.2 1.9 1.8 1.7 1.6 INCREMENTAL CURRENT (Amps Approx.) 7.00 6.40 5.70 5.20 4.70 4.30 3.90 3.60 3.30 3.00 2.70 2.50 2.30 2.10 1.90 1.70 1.50...