430P124X9600 Datasheet | Vishay

FEATURES - Economical - Extensive standard ratings - Rugged construction - Small size PERFORMANCE CHARACTERISTICS Operating Temperature: - 55°C to + 85°C. Capacitance Range: 0.0047µF to 10.0µF. Capacitance Tolerance: ± 20%, ± 10%, ± 5%. DC Voltage Rating: 50 WVDC to 600 WVDC. Dissipation Factor: 1.0% maximum. Voltage Test: 200% of rated voltage for 2 minutes. Insulation Resistance: At + 25°C: 25,000 Megohm - Microfarads or 50,000 Megohm minimum. At + 85°C: 1000 Megohm Microfarads or 2500 Megohm minimum. Vibration Test (Condition B): No mechanical damage, short, open or intermittent circuits. PHYSICAL CHARACTERISTICS Lead Pull: 5 pounds (2.3 kilograms) for one minute. No physical damage. Lead Bend: After three plete consecutive bends, no damage. Marking: Sprague® trademark, type or part number, capacitance and voltage. DC Life Test: 125% of rated voltage for 250 hours @ + 85°C. No open or short circuits. No visible damage. Maximum ∆ CAP = ± 10%. Minimum IR = 50% of initial limit. Maximum DF = 1.25%. Humidity Test: 95% relative humidity @ + 40°C for 250 hours, no visible damage. Maximum ∆ CAP ± 10%. Minimum IR = 20% of initial limit. Maximum DF = 2.0%. DIMENSIONS in inches [millimeters] 1.750 [44.45] Min. L + 0.062 [1.57] - 0.031 [0.79] 1.750 [44.45] Min. D Max. Solid Tinned Wire- - Lead size: D Max. < 0.270 [6.86] 0.025 [0.64] (No. 22 AWG). D Max. ≥ 0.270 [6.86] 0.032 [0.81] (No. 20 AWG). Leads to be within ± 0.062" [1.57mm] of center line at egress but not less than 0.031" [0.79mm] from edge. STANDARD RATINGS in inches [millimeters] CAPACITANCE (µF) PART NUMBER CASE SIZE D L ± 10% TOLERANCE 430P124X9050 430P154X9050 430P184X9050 430P224X9050 430P274X9050 430P334X9050 430P394X9050 430P474X9050 430P564X9050 430P684X9050 430P824X9050 ± 5% TOLERANCE 50 WVDC 430P124X5050 430P154X5050 430P184X5050 430P224X5050 430P274X5050 430P334X5050 430P394X5050 430P474X5050 430P564X5050 430P684X5050 430P824X5050 LEAD AWG NO. 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68...