DG2722 Datasheet | Vishay

.Data Sheet.co.kr Vishay Siliconix 2 Port, USB 2.0 High Speed (480 Mbps) Switch, DPDT Analog Switch DESCRIPTION The DG2722 is 2 port high speed analog switch optimized for USB 2.0 signal switching. The DG2722 switch is configured in DPDT. It handles bidirectional signal flow, achieving a 900 MHz - 3 d B bandwidth, and a port to port crosstalk and isolation at - 49 d B. Processed with high density sub micron CMOS, the DG2722 provide low parasitic capacitance. Signals are routed with minimized phase distortion and attain a bit to bit skew is as low as 40 p S. The DG2722 is designed for a wide range of operating voltages, from 2.7 V to 4.3 V that can be driven directly from one cell Li-ion battery. On-chip circuitry protects against conditions when either the D+/D- lines are shorted to the VBUS at the USB port. Additionally, logic control pins (S and OE) can tolerate the presence of voltages that are above the supply power rail (V+). The control logic threshold is guaranteed to be (VIH = 1.3 V/min). Latch up current is 300 m A, as per JESD78, and its ESD tolerance exceeds 8 k V. Packaged in ultra small mini QFN-10 (1.4 mm x 1.8 mm x 0.55 mm), it is ideal for portable high speed mix signal switching application. As a mitted partner to the munity and the environment, Vishay Siliconix manufactures this product with lead (Pb)-free device termination. The mini QFN-10 package has a nickel-palladium-gold device termination and is represented by the lead (Pb)-free “-E4” suffix to the ordering part number. The nickel-palladium-gold device terminations meet all JEDEC standards for reflow and MSL rating. As a further sign of Vishay Siliconix's mitment, the DG2722 is fully Ro HS plaint. Features - Halogen-free according to IEC 61249-2-21 Definition - Wide operation voltage range - Low on-resistance, 7  (typical at 3 V) - Low capacitance, 6.5 p F (typical) - 3 d B high bandwidth: 900 MHz (typical) - Low bit to bit skew: 40 p S (typical) - Low power consumption - Low...