ILD615 Datasheet | Vishay

FEATURES - Identical channel to channel footprint - Dual and quad packages feature : - Reduced board space - Lower pin and parts count - Better channel to channel CTR match - Improved mon mode rejection - Isolation rated voltage from double molded package, 4420 VRMS - Material categorization: for definitions of pliance please see .vishay./doc?99912 AGENCY APPROVALS - UL1577, file no. E52744, double protection - c UL - DIN EN 60747-5-5 (VDE 0884-5), available with option 1 - CQC: GB8898-2011 - CSA 93751 - FIMKO LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models Design Tools Related Documents Models DESCRIPTION The ILD615, ILQ615 are multi-channel phototransistor optocouplers that use Ga As IRED emitters and high gain NPN phototransistors. These devices are constructed using over / under leadframe optical coupling and double molded insulation technology resulting a withstand test voltage of 7500 VACPEAK and a working voltage of 1700 VRMS. The binned min./max. and linear CTR characteristics make these devices well suited for DC or AC voltage detection. Eliminating the phototransistor base connection provides added electrical noise immunity from the transients found in many industrial control environments. Because of guaranteed maximum non-saturated and saturated switching characteristics, the ILD615, ILQ615 can be used in medium speed data I/O and control systems. The binned min. / max. CTR specification allow easy worst case interface calculations for both level detection and switching applications. Interfacing with a CMOS logic is enhanced by the guaranteed CTR at IF = 1 m A. Rev. 1.7, 10-Dec-2020 Document Number: 83652 For technical questions, contact: optocoupleranswers@vishay. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT .vishay./doc?91000 .vishay. ILD615, ILQ615 Vishay Semiconductors ORDERING INFORMATION L...