Datasheet4U Logo Datasheet4U.com

LH1512BB - C Solid-State Relay

General Description

The LH1512 relays contain normally open and normally closed switches that can be used independently as a 1 form A and 1 form B relay, or when used together, as a 1 form C relay.

The relays are constructed as a mult.-chip hybrid device.

Actuation control is via an infrared LED.

Key Features

  • Current limit protection.
  • Isolation test voltage 3750 VRMS.
  • Typical RON 10 Ω.
  • Load voltage 200 V.
  • Load current 200 mA.
  • High surge capability.
  • Clean bounce free switching.
  • Low power consumption.
  • SMD lead available on tape and reel.
  • Material categorization: for definitions of compliance please see www. vishay. com/doc?99912.

📥 Download Datasheet

Datasheet Details

Part number LH1512BB
Manufacturer Vishay
File Size 228.56 KB
Description C Solid-State Relay
Datasheet download datasheet LH1512BB Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LH1512AB (LH15xx) 1 Form Relays AT&T
LH1510 High Voltage Optically Coupled Solid Siemens
LH1511 (LH15xx) 1 Form B Siemens Semiconductor
LH1514 80 OUTPUT LCD SEGMENT DRIVER Sharp Electrionic Components
LH1514AF 80 OUTPUT LCD SEGMENT DRIVER Sharp Electrionic Components

Other Datasheets by Vishay

Part Number Description
LH1512BAC C Solid-State Relay
LH1512BACTR C Solid-State Relay
LH1510AAB 1 Form A Solid State Relay
LH1510AABTR 1 Form A Solid State Relay
LH1510AT 1 Form A Solid State Relay

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.vishay.com LH1512BAC, LH1512BACTR, LH1512BB Vishay Semiconductors Dual 1 Form A/B, C Solid-State Relay DIP SMD S1 S1' S2 S2' S1 S1' S2 S2' 8 76 5 i179034_2 1 2 3 4 LINKS TO ADDITIONAL RESOURCES Design Tools 3D 3D 3D Models Models DESCRIPTION The LH1512 relays contain normally open and normally closed switches that can be used independently as a 1 form A and 1 form B relay, or when used together, as a 1 form C relay. The relays are constructed as a mult.-chip hybrid device. Actuation control is via an infrared LED. The output switch is a combination of a photodiode array with MOSFET switches and control circuity.