NTCALUG03 Datasheet | Vishay

FEATURES - Fast time response for surface applications pared to industry standard NTC lug sensors - Reduced thermal gradient, due to the use of small dimensions and nickel conductor, allowing for an accurate surface temperature measurement - The sensor is not suitable for being permanently in contact with water or liquids - Small size connector and small lug ring tongue terminal, allowing for temperature sensing at locations where only limited space is available - Connector ZHR-2 (optional) - pliant to Ro HS directive 2002/95/EC QUICK REFERENCE DATA PARAMETER Resistance value at 25 °C Tolerance on R25 - value B25/85 value Tolerance on B25/85 - value Maximum dissipation at 25 °C Thermal time constant τ Dissipation factor Operating temperature range at zero power Min. dielectric withstanding voltage between terminals and lug R/T values Climatic category (IEC 60539) Weight (without connector) Weight (with connector) VALUE 10 kΩ to 47 kΩ ± 2 % to ± 3 % 3740K to 3984K ± 0.5 % to ± 1.5 % 100 m W ≈5s 10 m W/K - 40 °C to 125 °C 1000 VAC See table 40/125/56 0.5 g 0.6 g APPLICATIONS Thermistors used for surface temperature sensing and control in: - puter equipment - MOSFETS, IC’s, Power Electronics, heatsink temperature control - Consumer appliances - Industrial equipment - Automotive equipment DESCRIPTION Miniature insulated chip thermistor with a negative temperature coefficient in accordance with IEC 60539. The device has no marking. MOUNTING - The sensor can be mounted by means of a screw. For stud size, metric 2 mm M2/american stud #1 or #2 - The end wire can be soldered, welded or crimped to a connector - Optional connector for Wire-to-Wire or Wire-to-Board connections Note - Other R25 values and tolerances available upon request ELECTRICAL DATA AND ORDERING INFORMATION R25 - VALUE B25/85 - VALUE R25 - TOL. (kΩ) (K) 10 10 10 ±3% ±3% ±2% 3984 3984 3984 3984 3740 3740 3740 3740 B25/85 - TOL. ± 0.5 % ± 0.5 % ± 0.5 % ± 0.5 % ± 1.5 % ± 1.5 % ± 1.5 % ± 1.5 % SAP MATERIAL...