SFH6138 Datasheet | Vishay

Features - - - - - - - - - - High Current Transfer Ratio, 800 % Low Input Current Requirement, 0.5 m A High Output Current, 60 m A Isolation Test Voltage, 5300 VRMS TTL patible Output, 0.1 V VOL High mon Mode Rejection, 500 V/µs DC to 0.1 Megabit/Sec. Operation Adjustable Bandwidth-Access to Base Standard Molded Dip Plastic Package Lead-free ponent NC 1 A C 2 3 8 VCC 7 VB 6 V0 5 GND NC 4 i179082 e3 Pb Pb-free - ponent in accordance to Ro HS 2002/95/EC and WEEE 2002/96/EC Agency Approvals - UL1577, File No. E52744 System Code H or J, Double Protection - DIN EN 60747-5-2 (VDE0884) DIN EN 60747-5-5 pending Available with Option 1 Applications Logic Ground Isolation-TTL/TTL, TTL/CMOS, CMOS/ CMOS, CMOS/TTL EIA RS 232C Line Receiver Low Input Current Line Receiver-Long Lines, Party Lines Telephone Ring Detector 117 VAC Line Voltage Status Indication-Low Input Power Dissipation Low Power Systems-Ground Isolation gain photon detector in an eight pin dual-in-line package. Separate pins for the photo diode and output stage enable TTL patible saturation voltages with high speed operation. Photodarlington operation is achieved by tying the VCC and VO terminals together. Access to the base terminal allows adjustment to the gain bandwidth. The SFH6138 is ideal for TTL applications since the 300 % minimum current transfer ratio with an LED current of 1.6 m A enables operation with one unit load-in and one unit load-out with a 2.2 kΩ pull-up resistor. The SFH6139 is best suited for low power logic applications involving CMOS and low power TTL. A 400 % current transfer ratio with only 0.5 m A of LED current is guaranteed from 0 °C to 70 °C. Order Information Part SFH6138 SFH6139 Remarks CTR ≥ 300 %, DIP-8 CTR ≥ 400 %, DIP-8 Description High mon mode transient immunity and very high current ratio together with 5300 VRMS insulation are achieved by coupling an LED with an integrated high For additional information on the available options refer to Option Information. Document...