Datasheet4U Logo Datasheet4U.com

SIC734CD9 - Fast Switching MOSFETs

General Description

The SiC734CD9 is an integrated solution which contains two PWM-optimized MOSFETs (high side and low side MOSFETs) and a driver IC.

Integrating the driver allows better optimization of Power MOSFETs.

This minimizes the losses and provides better performance at higher frequency.

Key Features

  • Low-side MOSFET control pin for pre-bias start-up.
  • Undervoltage Lockout for safe operation.
  • Internal boostrap diode reduces component count.
  • Break-Before-Make operation.
  • Turn-on/Turn-off Capability.
  • Compatible with any single or multi-phase PWM controller.
  • Low profile, thermally enhanced PowerPAK® MLF 9 x 9 Package PowerPAK MLF 9 x 9.

📥 Download Datasheet

Datasheet Details

Part number SIC734CD9
Manufacturer Vishay
File Size 266.69 KB
Description Fast Switching MOSFETs
Datasheet download datasheet SIC734CD9 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SIC73 Low Profile SMD type ETC
SiC769CD Integrated DrMOS Power Stage Vishay
SiC781CD VRPower Integrated Power Stage Vishay
SiC783ACD Power Stage Vishay
SIC02A065NS SILICON CARBIDE SCHOTTKY DIODE Pan Jit International

Other Datasheets by Vishay

Part Number Description
SIC714CD10 Fast Switching MOSFETs
SIC762CD Integrated DrMOS Power Stage
SIC769 Integrated DrMOS Power Stage
SIC769ACD Integrated DrMOS Power Stage
SIC778A High Performance DrMOS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SiC734CD9 Vishay Siliconix Fast Switching MOSFETs With Integrated Driver PRODUCT SUMMARY Input Voltage Range Output Voltage Range Operating Frequency Continuous Output Current Peak Efficiency Optimized Duty Cycle Ratio 3.3 to 24 V 0.5 to 6 V 100 kHz to 1 MHz Up to 25 A 92.8 10 % FEATURES • Low-side MOSFET control pin for pre-bias start-up • Undervoltage Lockout for safe operation • Internal boostrap diode reduces component count • Break-Before-Make operation • Turn-on/Turn-off Capability • Compatible with any single or multi-phase PWM controller • Low profile, thermally enhanced PowerPAK® MLF 9 x 9 Package PowerPAK MLF 9 x 9 APPLICATIONS • DC-to-DC Point-of-Load Converters - 3.3 V, 5 V, or 12 V Intermediate BUS - Examples - 12 VIN/0.8 - 2.5 VOUT - 5 VIN/0.8 - 1.