Datasheet4U Logo Datasheet4U.com

SIP11203DB - Demonstration Board

Key Features

  • High efficiency, > 87 % at full rated load current.
  • Delivers up to 15 amps of output current with minimal de-rating - no heat sink required.
  • Wide input voltage range: 35 V - 75 V, with 100 V 100 ms input voltage transient capability.
  • No minimum load requirement means no preload resistors required.
  • Remote sense for the output voltage compensates for output distribution drops.
  • On/Off control referenced to input side.
  • Input under-volta.

📥 Download Datasheet

Datasheet Details

Part number SIP11203DB
Manufacturer Vishay
File Size 462.57 KB
Description Demonstration Board
Datasheet download datasheet SIP11203DB Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SIP10F Resistor Networks HITANO
SIP10G Resistor Networks HITANO
SIP10J Resistor Networks HITANO
SiP12101 High Performance Step-Down DC-DC Converter Vishay
SiP12107 3A Current-Mode Constant On-Time Synchronous Buck Regulator Vishay

Other Datasheets by Vishay

Part Number Description
SIP12201 Synchronous Step Down Controller
SIP12202 Synchronous Step Down Controller
SiP12401 Boost Controller For Double AA Cell or Li-Ion Battery
SiP12501 Boost Controller for Single/Double AA Cell or NiMH Battery
SiP12502 500 mA - Fixed Output Boost Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com SiP11203DB Vishay Siliconix SiP11203 Demonstration Board DEMONSTRATION BOARD TEST SETUP This demonstration board test setup information details the test procedure for using the SiP11203 demonstration board and its associated host board. The demonstration board is plugged vertically into the host board. Only one orientation is possible for correct plugin. The input and output power leads and an optional enable lead are wired into the host board connectors as shown in Figure 1. A mechanical toggle switch is also available on the host board for manual enabling and disabling of the demonstration board. The host board is configured by default for manual switch toggling of enable/disable.