SMM0102
SMM0102 is Thin Film Micro-MELF Resistors manufactured by Vishay.
FEATURES
- Advanced thin film technology
- Low TCR and tight tolerances
- Excellent stability in different environmental conditions
- Intrinsic sulfur resistance
- Material categorization: for definitions of pliance please see .vishay./doc?99912
APPLICATIONS
- Automotive
- Telemunication
- Industrial
- Medical equipment
TECHNICAL SPECIFICATIONS
DESCRIPTION
DIN size Metric size code Resistance range Resistance tolerance Temperature coefficient Rated dissipation, P70 (1) Operating voltage, Umax. ACRMS/DC Permissible film temperature, ϑF max. (1) Operating temperature range (1) Permissible voltage against ambient (insulation):
1 min; Uins Failure rate: FITobserved Note (1) Please refer to APPLICATION INFORMATION below.
SMM0102 0102
RC2211M 10 Ω to 2.21 MΩ; 0 Ω
± 1 %; ± 0.1 % ± 50 ppm/K; ± 25 ppm/K; ± 15 ppm/K
0.200 W 150 V 125 °C
-55 °C to 125 °C
200 V ≤ 0.1 x 10-9/h
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
Revision: 04-Dec-15
1 Document Number: 20003
For technical questions, contact: melf@vishay.
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT .vishay./doc?91000
.vishay.
Vishay Draloric
MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION
OPERATION MODE
STANDARD
Rated dissipation, P70
0.200 W
Operating temperature range
-55 °C to 125 °C
Permissible film temperature, ϑF max.
Max. resistance change at P70 for...
