SMP26 Datasheet | Vishay

FEATURES - Very low profile - typical height of 1.0 mm - Ideal for automated placement - Available in uni-directional - 400 W peak pulse power capability with a 10/1000 µs waveform - Excellent clamping capability - Very fast response time - Low incremental surge resistance DO-220AA (SMP) e SMP TM Series - Meets MSL level 1, per J-STD-020 - Solder dip 260 °C, 40 s - ponent in accordance to Ro HS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, puter, industrial, automotive and telemunication. MECHANICAL DATA Case: DO-220AA (SMP) Molding pound meets UL 94 V-0 flammability rating Base P/N-E3 - Ro HS pliant, mercial grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end PRIMARY CHARACTERISTICS VWM PPPM IFSM TJ max. 11 V to 36 V 400 W 40 A 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 µs waveform Peak pulse current with a 10/1000 µs waveform (1) (2) (1)(2) SYMBOL (Fig. 1) PPPM IPPM IFSM VF TJ, TSTG VALUE 400 See table next page 40 2.5 - 55 to + 150 UNIT W A A V °C Peak forward surge current 10 ms single half sine-wave Maximum instantaneous forward voltage at 25 A (3) Operating junction and storage temperature range Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal (3) Pulse test: 300 µs pulse width, 1 % duty cycle Document Number: 88481 Revision: 20-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay., PDD-Asia@vishay., PDD-Europe@vishay. .vishay. 1 New Product SMP11 thru SMP36A Vishay General Semiconductor .. ELECTRICAL CHARACTERISTICS...