UHF10JT
UHF10JT is High Voltage Ultrafast Rectifier manufactured by Vishay.
.Data Sheet.co.kr
New Product
UH10JT & UHF10JT
Vishay General Semiconductor
High Voltage Ultrafast Rectifier
Features
TO-220AC ITO-220AC
- Oxide planar chip junction
- Ultrafast recovery time
- Soft recovery characteristics
- Low switching losses, high efficiency
- High forward surge capability
2 1
2 1
UH10JT
PIN 1 PIN 2 CASE PIN 1 PIN 2
- Solder dip 260 °C, 40 s
- ponent in accordance to Ro HS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high voltage continuous mode power factor correctors (CCM PFC), switching mode power supplies, freewheeling diodes and secondary dc-to-dc rectification application.
PRIMARY CHARACTERISTICS
IF(AV) VRRM IFSM trr VF at IF = 10 A TJ max. 10 A 600 V 90 A 25 ns 1.41 V 175 °C
MECHANICAL DATA Case: TO-220AC, ITO-220AC Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min Operating junction and storage temperature range SYMBOL VRRM IF(AV) IFSM VAC TJ, TSTG UH10JT 600 10 90 1500
- 55 to + 175 UHF10JT UNIT V A A V °C
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS IF = 5 A IF = 10 A IF = 5 A IF = 10 A TA = 25 °C VF TA = 125 °C SYMBOL TYP. 1.70 2.5 1.15 1.41 MAX. 3.0 V 1.80 UNIT
Instantaneous forward voltage (1)
Document Number: 88998 Revision: 25-Aug-08
For technical questions within your region, please contact one of the following: PDD-Americas@vishay., PDD-Asia@vishay., PDD-Europe@vishay.
.vishay....
