TSOP1133GL1 Datasheet | Vishay

Description The TSOP11..GL1 - series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the operation with short burst transmission codes (e.g. RECS 80) and high data rates. GND VS OUT 94 8692 Features D Photo detector and preamplifier in one package D Internal filter for PCM frequency D Improved shielding against electrical field disturbance Special Features D Enhanced data rate of 2400 bit/s D Operation with short bursts possible (≥6 cycles/burst) TTL and CMOS patibility Output active low Low power consumption High immunity against ambient light 2 Input Control Circuit 80 k W 3 PIN AGC Band Pass Demodulator 1 94 8136 Document Number 82145 Rev. 3, 29-Mar-01 .vishay. 1 (8) TSOP11..GL1 Vishay Telefunken Absolute Maximum Ratings Tamb = 25_C Parameter Supply Voltage Supply Current Output Voltage Output Current Junction Temperature Storage Temperature Range Operating Temperature Range Power Consumption Soldering Temperature Test Conditions (Pin 2) (Pin 2) (Pin 3) (Pin 3) Symbol VS IS VO IO Tj Tstg Tamb Ptot Tsd Value - 0 6.0 5 - 0 6.0 5 100 - 25...+85 - 25...+85 50 260 Unit V m A V m A °C °C °C m W °C (Tamb 85 °C) t 5s x x Basic Characteristics Tamb = 25_C Parameter Supply Current (Pin 2) Supply Voltage (Pin 2) Transmission Distance Output Voltage Low (Pin 3) Irradiance (30 - 40 k Hz) Irradiance (56 k Hz) Irradiance Directivity Ev = 0, test signal see fig.8, IR diode TSAL6200, IF = 0.4 A IOSL = 0.5 m A,Ee = 0.7 m W/m2, f = fo, test signal see fig.7 Test signal see fig.7 Test signal see fig.8 Test signal see fig.7 Test signal see fig.8 Test signal see fig.7 Angle of half transmission distance Test Conditions VS = 5 V, Ev = 0 VS = 5 V, Ev = 40 klx, sunlight Symbol ISD ISH VS d VOSL Ee min i Ee min Ee max ϕ1/2 30 ±45 0.4 0.35 0.45 0.40...