Datasheet4U Logo Datasheet4U.com

AZ23C4V3-G - Small Signal Zener Diodes

This page provides the datasheet information for the AZ23C4V3-G, a member of the AZ23-G Small Signal Zener Diodes family.

Datasheet Summary

Features

  • Dual silicon planar Zener diodes, common anode.
  • The Zener voltages are graded according to the international E24 standard. Standard Zener voltage tolerance is ± 5 %, indicated by the “C” in the ordering code. Replace “C” with “B” for 2 % tolerance.
  • The parameters are valid for both diodes in one case. ΔVZ and ΔRzj of the two diodes in one case is ≤ 5 %.
  • AEC-Q101 qualified available (part number on request).
  • ESD capability according to AEC-Q101: human.

📥 Download Datasheet

Datasheet preview – AZ23C4V3-G

Datasheet Details

Part number AZ23C4V3-G
Manufacturer Vishay
File Size 116.64 KB
Description Small Signal Zener Diodes
Datasheet download datasheet AZ23C4V3-G Datasheet
Additional preview pages of the AZ23C4V3-G datasheet.

📁 Similar Datasheet

  • AZ23C4V3 - ZENER DIODE (JCET)
  • AZ23C4V3 - Dual SMD Zener Diode (Taiwan Semiconductor)
  • AZ23C4V3 - Zener Diode (MCC)
  • AZ23C4V3 - DUAL SURFACE MOUNT ZENER DIODES (Pan Jit International)
  • AZ23C4V3 - 300mW DUAL SURFACE MOUNT ZENER DIODE (Diodes)
  • AZ23C4V7 - ZENER DIODE (JCET)
  • AZ23C4V7 - Dual SMD Zener Diode (Taiwan Semiconductor)
  • AZ23C4V7 - Zener Diode (MCC)
  • AZ23C4V7 - DUAL SURFACE MOUNT ZENER DIODES (Pan Jit International)
  • AZ23C4V7 - 300mW DUAL SURFACE MOUNT ZENER DIODE (Diodes)
Other Datasheets by Vishay

Full PDF Text Transcription

Click to expand full text
www.vishay.com AZ23-G-Series Vishay Semiconductors Small Signal Zener Diodes, Dual 2 1 ADDITIONAL RESOURCES 3D 3D 3D Models 3 20456 PRIMARY CHARACTERISTICS PARAMETER VALUE VZ range nom. Test current IZT VZ specification Circuit configuration 2.7 to 51 5 Pulse current Common anode UNIT V mA FEATURES • Dual silicon planar Zener diodes, common anode • The Zener voltages are graded according to the international E24 standard. Standard Zener voltage tolerance is ± 5 %, indicated by the “C” in the ordering code. Replace “C” with “B” for 2 % tolerance • The parameters are valid for both diodes in one case.
Published: |