Vishay LH1512BB
The LH1512 relays contain normally open and normally closed switches that can be used independently as a 1 form A and 1 form B relay, or when used together, as a 1 form C relay. The relays are constructed as a mult.-chip hybrid device. The output switch is a combination of a photodiode array with MOSFET switches and control circuity.| Part No. | LH1512BB |
|---|---|
| Datasheet | LH1512BB Download |
| Manufacturer |  Vishay |
| Description | C Solid-State Relay |
| Buy | Stock & Price |
DESCRIPTION
Actuation control is via an infrared LED.FEATURES
● Current limit protection● Isolation test voltage 3750 VRMS
● Typical RON 10 Ω
● Load voltage 200 V
● Load current 200 mA
● High surge capability
● Clean bounce free switching
● Low power consumption
● SMD lead available on tape and reel
● Material categorization: for definitions of compliance please see
APPLICATIONS
● General telecom switching - On / off hook control - Ring delay - Dial pulse - Ground start - Ground fault protection● Instrumentation
● Industrial controls AGENCY APPROVALS
● UL
● VDE
● CQC
● FIMKO ORDERING INFORMATION L H 1 5 1 PART NUMBER PACKAGE SMD-8, tubes SMD-8, tape and reel DIP-8, tubes 2 B # # ELECTR. PACKAGE VARIATION CONFIG. T R DIP TAPE AND REEL 7.62 mm UL, CSA, FIMKO LH1512BAC LH1512BACTR LH1512BB SMD > 0.1 mm Rev. 1.8, 13-Oct-2020 1 Document Number: 83812 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED H...
