P6SMB6.8A Datasheet | Vishay

FEATURES - Low profile package Available - Ideal for automated placement - Glass passivated chip junction - Available in unidirectional and bidirectional - 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % Available - Excellent clamping capability - Very fast response time - Low incremental surge resistance - Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C - AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3 - Material categorization: for definitions of pliance please see .vishay./doc?99912 TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, puter, industrial, and telemunication. MECHANICAL DATA Case: SMB (DO-214AA) Molding pound meets UL 94 V-0 flammability rating Base P/N-E3 - Ro HS-pliant, mercial grade Base P/N-M3 - halogen-free, Ro HS-pliant, mercial grade Base P/NHE3_X - Ro HS-pliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, Ro HS-pliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, ...) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test Polarity: for unidirectional types the band denotes cathode end, no marking on bidirectional types MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1) Peak pulse current with a 10/1000 μs waveform (1) Power dissipation on infinite heatsink at TA = 50 °C Peak forward surge current 8.3 ms single half sine-wave unidirectional only (2) Operating junction and storage temperature range Notes (1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 (2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal SYMBOL PPPM IPPM PD IFSM TJ, TSTG VALUE 600 See next...