Datasheet4U Logo Datasheet4U.com

PCAN2512 - Precision Thin Film Chip Resistor

This page provides the datasheet information for the PCAN2512, a member of the PCAN0603 Precision Thin Film Chip Resistor family.

Features

  • High thermal conductivity aluminum nitride substrate Available.
  • Power rating up to 6.0 W.
  • Resistance range 2  to 30.1 k Available.
  • Resistor tolerance to ± 0.1 %.
  • TCR to ± 25 ppm/°C.
  • Flame resistant UL 94 V-0 Available.
  • Material categorization: for definitions of compliance please see www. vishay. com/doc?99912 Note.
  • This datasheet provides information about pa.

📥 Download Datasheet

Datasheet preview – PCAN2512

Datasheet Details

Part number PCAN2512
Manufacturer Vishay
File Size 272.54 KB
Description Precision Thin Film Chip Resistor
Datasheet download datasheet PCAN2512 Datasheet
Additional preview pages of the PCAN2512 datasheet.

📁 Similar Datasheet

  • PCA0102A - LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP (Z-Communications)
  • PCA0163A - LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP (Z-Communications)
  • PCA0174A-LF - Telecommunications - Satellite (Z-Communications)
  • PCA0198A - LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP (Z-Communications)
  • PCA0300A - LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP (Z-Communications)
  • PCA0445A - LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP (Z-Communications)
  • PCA0495A - LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP (Z-Communications)
  • PCA1070 - Multistandard programmable analog CMOS transmission (NXP)
  • PCA1127A - PHASE LOCKED LOOP (Z-Communications)
  • PCA1292A - PHASE LOCKED LOOP (Z-Communications)
Other Datasheets by Vishay
  • PCAN0603 - Precision Thin Film Chip Resistor
  • PCAN0805 - Precision Thin Film Chip Resistor
  • PCAN1206 - Precision Thin Film Chip Resistor

Full PDF Text Transcription

Click to expand full text
www.vishay.com PCAN Vishay Dale Thin Film High Power Aluminum Nitride, Wraparound Surface Mount, Precision Thin Film Chip Resistor (up to 6 W) PCAN series chip resistors are designed on aluminum nitride ceramic substrates with enlarged backside terminations to reduce the thermal resistance between the topside resistor layer and the solder joint on the end users circuit assembly. Actual power handling capability is limited by the end user mounting process. As with any high power chip resistor the ability to remove the heat is critical to the overall performance of the device. FEATURES • High thermal conductivity aluminum nitride substrate Available • Power rating up to 6.0 W • Resistance range 2  to 30.1 k Available • Resistor tolerance to ± 0.
Published: |