SBLB8L40 Datasheet | Vishay

FEATURES - Guardring for overvoltage protection - Lower power losses, high efficiency - Low forward voltage drop - High forward surge capability - High frequency operation - Meets MSL level 1, per J-STD-020C, LF maximum peak of 245 °C (for TO-263AB package) - Solder bath temperature 275 °C maximum, 10 s, per JESD 22-B106 (for TO-220AC and ITO-220AC package) - Material categorization: For definitions of pliance please see .vishay./doc?99912 TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, DC/DC converters and polarity protection application. MECHANICAL DATA Case: TO-220AC, ITO-220AC, TO-263AB Molding pound meets UL 94 V-0 flammability rating Base P/N-E3 - Ro HS-pliant, mercial grade Base P/NHE3 - Ro HS-pliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per leg VRRM VRWM VDC IF(AV) IFSM Peak repetitive reverse current at tp = 2 ms, 1 k Hz Voltage rate of change (rated VR) Operating junction and storage temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min IRRM d V/dt TJ, TSTG VALUE 40 28 40 8 1.0 10 000 - 65 to + 125 UNIT V A V/μs °C Revision: 15-Jun-12 1 Document Number: 88825 For technical questions within your region: Diodes Americas@vishay., Diodes Asia@vishay., Diodes Europe@vishay. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT...