SFH615AGR Datasheet | Vishay

DESCRIPTION The SFH615XXX features a large assortment of current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a Ga As infrared emitting diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 package. The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.54 mm lead spacing. Creepage and clearance distances of > 8 mm are achieved with option 6. This version plies with 60950 (DIN VDE 0805) for reinforced insulation up to operation voltage of 400 VRMS or DC. FEATURES - Low CTR degradation - Good CTR linearity depending on forward current - Isolation test voltage, 5300 VRMS - High collector emitter voltage, VCEO = 70 V - Low saturation voltage - Fast switching times - Temperature stable - Low coupling capacitance - End stackable, 0.100" (2.54 mm) spacing - High mon mode interference immunity (unconnected base) - Material categorization: for definitions of pliance please see .vishay./doc?99912 AGENCY APPROVALS - UL1577 - c UL - DIN EN 60747-5-5 (VDE 0884) available with option 1 - BSI ORDERING INFORMATION SFH6 1 5Ax x X0 0 # PART NUMBER PACKAGE OPTION DIP-# 7.62 mm Option 7 Option 6 10.16 mm Option 8 Option 9 > 0.7 mm AGENCY CERTIFIED/PACKAGE UL, c UL, BSI, FIMKO DIP-4 DIP-4, 400 mil, option 6 SMD-4, option 7 SMD-4, option 8 SMD-4, option 9 UL, c UL, VDE, BSI, FIMKO DIP-4 DIP-4, 400 mil, option 6 SMD-4, option 7 SMD-4, option 8 SMD-4, option 9 50 to 600 SFH615AA SFH615AA-X006 SFH615AA-X007 50 to 600 SFH615AA-X001 SFH615AA-X017T (1) - CTR (%) 5 m A 100 to 600 100 to...