SM8S30CA Datasheet | Vishay

FEATURES - Ro HS pliant junction passivation - TJ = 175 °C capability suitable for high reliability and automotive requirement - Bidirectional - Low leakage current - High surge capability - Meet ISO 7637-2 and ISO 16750-2 surge specification (varied by test condition) - Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C - AEC-Q101 qualified - Material categorization: for definitions of pliance please see .vishay./doc?99912 TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lightning, especially for automotive load dump protection application. MECHANICAL DATA Case: DO-218AB Molding pound meets UL 94 V-0 flammability rating Base P/NHM3 - halogen-free, Ro HS-pliant, and AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 HM3 suffix meets JESD 201 class 2 whisker test Polarity: bidirectional, no cathode band MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE Peak pulse power dissipation with 10/1000 μs waveform (fig. 4) with 10/10 000 μs waveform (fig. 5) PPPM (1)(2) 6600 10CA to 20CA 22CA to 85CA 5000 5200 Power dissipation on infinite heatsink at TC = 25 °C (fig.2) Peak pulse current with 10/1000 μs waveform (fig. 4) Operating junction and storage temperature range PD IPPM (1) TJ, TSTG 8.0 See next table -55 to +175 Notes (1) Non-repetitive current pulse derated above TA = 25 °C, per fig. 3 (2) Power calculation is based on IPPM times defined maximum clamping voltage by pulse width UNIT W A °C Revision: 07-Aug-2023 Document Number: 98229 For technical questions within your region: Diodes Americas@vishay., Diodes Asia@vishay., Diodes Europe@vishay. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT .vishay./doc?91000 .vishay. SM8S10CA thru SM8S85CA Vishay General...