SM8S33AT Datasheet | Vishay

FEATURES - Junction passivation optimized design passivated anisotropic rectifier technology - TJ = 175 °C capability suitable for high reliability and automotive requirement - Available in uni-directional polarity only - Low leakage current - Low forward voltage drop - High surge capability - Meets ISO7637-2 surge specification (varied by test condition) - Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C - AEC-Q101 qualified - Automotive ordering code: base P/NHE3 - Material categorization: for definitions of pliance please see .vishay./doc?99912 TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection application. MECHANICAL DATA Case: DO-218AC Molding pound meets UL 94 V-0 flammability rating Base P/NHE3 - Ro HS-pliant, AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 HE3 suffix meets JESD 201 class 2 whisker test Polarity: heatsink is anode MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with 10/1000 μs waveform with 10/10 000 μs waveform Power dissipation on infinite heatsink at TC = 25 °C (fig. 1) Peak pulse current with 10/1000 μs waveform Peak forward surge current 8.3 ms single half sine-wave Operating junction and storage temperature range Note (1) Non-repetitive current pulse derated above TA = 25 °C SYMBOL PPPM PD IPPM (1) IFSM TJ, TSTG VALUE 6600 5200 8.0 See next table 700 -55 to +175 UNIT W A A °C Revision: 03-Dec-2018 Document Number: 87734 For technical questions within your region: Diodes Americas@vishay., Diodes Asia@vishay., Diodes Europe@vishay. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT .vishay./doc?91000 .vishay. SM8S10AT thru...