Datasheet4U Logo Datasheet4U.com

SiP32454 - Slew Rate Controlled Load Switch

General Description

The SiP32454 and SiP32455 are slew rate controlled integrated high side load switches that operate in the input voltage range from 0.8 V to 2.5 V.

The SiP32454 and SiP32455 are of N-channel MOSFET switching elements that provide 28 mΩ switch on resistance.

Key Features

  • Low input voltage, 0.8 V to 2.5 V.
  • Low RON, 28 mΩ typical.
  • Slew r.

📥 Download Datasheet

Datasheet Details

Part number SiP32454
Manufacturer Vishay
File Size 217.54 KB
Description Slew Rate Controlled Load Switch
Datasheet download datasheet SiP32454 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SIP32452 Load Switch Vishay Siliconix
SIP32453 Load Switch in WCSP4 Vishay Siliconix
SIP32458 (SIP32458 / SIP32459) Slew Rate Controlled Load Switch Vishay Siliconix
SIP32459 (SIP32458 / SIP32459) Slew Rate Controlled Load Switch Vishay Siliconix
SIP32411 Slew Rate Controlled Load Switch Vishay Siliconix

Other Datasheets by Vishay

Part Number Description
SIP32451 Load Switch in WCSP4
SiP32455 Slew Rate Controlled Load Switch
SiP32401A Slew Rate Controlled Load Switch
SiP32402A Slew Rate Controlled Load Switch
SiP32408 Slew Rate Controlled Load Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SiP32454, SiP32455 Vishay Siliconix 0.8 V to 2.5 V, 28 mΩ, Slew Rate Controlled Load Switch in WCSP4 DESCRIPTION The SiP32454 and SiP32455 are slew rate controlled integrated high side load switches that operate in the input voltage range from 0.8 V to 2.5 V. The SiP32454 and SiP32455 are of N-channel MOSFET switching elements that provide 28 mΩ switch on resistance. They have a 1 ms at 1.2 V and 1.5 ms at 2.5 V slow slew rate that limits the in-rush current and minimizes the switching noise. These devices’ low voltage logic control threshold can interface with low voltage control I/O directly without extra level shift or driver. A 2 MΩ pull-down resistor is integrated at logic control EN pin. SiP32454 integrates a switch OFF output discharge circuit.