Datasheet4U Logo Datasheet4U.com

TSOP85436 - IR Receiver

Download the TSOP85436 datasheet PDF. This datasheet also covers the TSOP85230 variant, as both devices belong to the same ir receiver family and are provided as variant models within a single manufacturer datasheet.

Description

The TSOP852..,TSOP854 series are two lens miniaturized receiver modules for infrared remote control systems.

One PIN diode per lens and a preamplifier are assembled on a PCB, the epoxy lens cap is designed as an IR filter.

The demodulated output signal can be directly decoded by a microprocessor.

Features

  • Very low supply current.
  • Photo detectors and preamplifier in one package.
  • Internal filter for PCM frequency.
  • Supply voltage: 2.5 V to 5.5 V 20427.
  • Improved immunity against ambient light.
  • Capable of side or top view.
  • Two lenses for high sensitivity and wide receiving angle.
  • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC.
  • Insensitive to supply voltage ripple and noise.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TSOP85230-Vishay.pdf) that lists specifications for multiple related part numbers.

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TSOP852.., TSOP854.. Vishay Semiconductors IR Receiver Modules for Remote Control Systems FEATURES • Very low supply current • Photo detectors and preamplifier in one package • Internal filter for PCM frequency • Supply voltage: 2.5 V to 5.5 V 20427 • Improved immunity against ambient light • Capable of side or top view • Two lenses for high sensitivity and wide receiving angle • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC • Insensitive to supply voltage ripple and noise DESCRIPTION The TSOP852..,TSOP854 series are two lens miniaturized receiver modules for infrared remote control systems. One PIN diode per lens and a preamplifier are assembled on a PCB, the epoxy lens cap is designed as an IR filter.
Published: |