VSOP584xx Datasheet | Vishay

.Data Sheet.co.kr VSOP584.. .vishay. Vishay Semiconductors Preamplifier Circuit for IR Remote Control Features - Narrow bandpassfilter for all mon carrier frequencies - High immunity against DC light - Intelligent AGC to suppress disturbance from fluorescent lamps and CRTs - Low power consumption - Wide supply voltage range - High immunity against ripple on the supply voltage - Output active low - IC manufactured in CMOS technology - Small QFN package with 2 mm width - pliant to Ro HS Directive 2002/95/EC Note - - Please see document “Vishay Material Category Policy”: .vishay./doc?99902 MECHANICAL DATA Pinning: 1, 4, 5= N.C., 2 = VS, 3 = OUT, 6, 8 = GND, 7 = IN DESCRIPTION The VSOP584.. is designed for use in an IR receiver application together with a photo pin diode. It is a sophisticated receiver concept that is very sensitive to data signals and patible with the most mon data formats for IR remote control. On the other hand it is immune to DC current caused by DC light sources such as tungsten bulbs. The disturbance signal of fluorescent lamps is suppressed; there are no unwanted pulses at the output. PARTS TABLE CARRIER FREQUENCY 36 k Hz 38 k Hz Note - Circuits for other carrier frequencies are available on request. PART NUMBER VSOP58436 VSOP58438 BLOCK DIAGRAM (simplified) APPLICATION CIRCUIT 100 Ω + VS VS = 2.7 V to 5.5...