Datasheet4U Logo Datasheet4U.com

VSC7147-01 - Hex PBC

General Description

The VSC7147-01 and VSC7147-05 contain six Port Bypass Circuits (PBCs), dual FibreTimer repeater/retimer cells, and dual Signal Detect Units (SDUs).

These functions are integrated into a single part to minimize part count, cost, high-frequency routing, and jitter.

Key Features

  • NCITS T11 Fibre Channel Compliant at 1.0625Gb/s and 2.125Gb/s.
  • Two FibreTimer® Cells Configured as:.
  • Repeaters for Low Latency.
  • Retimers for True Fibre Channel Compliance.
  • Six Port Bypass Circuits (PBCs).
  • Two Digital Signal Detect Units (SDUs).
  • Cable Equalization on All High-Speed Inputs.
  • Speed-Independent Tx and Rx Paths to Aid in Auto-Speed Negotiation.
  • 106.25MHz Reference Clock.
  • 5V-Tolerant LVTTL Inputs.
  • VSC7147-0x Adds an Analog Signal.

📥 Download Datasheet

Datasheet Details

Part number VSC7147-01
Manufacturer Vitesse Semiconductor
File Size 386.33 KB
Description Hex PBC
Datasheet download datasheet VSC7147-01 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
VSC7145 Dual Speed 10-bit Serializer/Deserializer ETC
VSC7166 OC-192 Very Short Reach (VSR) Converter Vitesse Semiconductor Corporation
VSC7173 Enhanced 2:1 Port Selector and 1:2 Port Multiplier Maxim Integrated Products
VSC7177 Enhanced 2:1 Port Selector Maxim Integrated Products
VSC7212 Gigabit Interconnect Chip ETC

Other Datasheets by Vitesse Semiconductor

Part Number Description
VSC7147-05 Hex PBC
VSC7105 1.0625 Gbit/sec Transmitter/Receiver
VSC7106 1.0625 Gbit/sec Transmitter/Receiver
VSC7121 Quad Port Bypass Circuit
VSC7123 10-Bit Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Downloaded by data_acq@partminer.com on May 5, 2008 from Vitesse.com VSC7147-01 and VSC7147-05 Data Sheet Hex PBC with Dual Repeater/Retimer for 1.0625Gb/s and 2.125Gb/s FC-AL Disk Arrays FEATURES ● NCITS T11 Fibre Channel Compliant at 1.0625Gb/s and 2.125Gb/s ● Two FibreTimer® Cells Configured as: ● Repeaters for Low Latency ● Retimers for True Fibre Channel Compliance ● Six Port Bypass Circuits (PBCs) ● Two Digital Signal Detect Units (SDUs) ● Cable Equalization on All High-Speed Inputs ● Speed-Independent Tx and Rx Paths to Aid in Auto-Speed Negotiation ● 106.25MHz Reference Clock ● 5V-Tolerant LVTTL Inputs ● VSC7147-0x Adds an Analog Signal Detect (ASD) Function to the VSC7147 ● Single 2.5V Supply, 1.