DESCRIPTION
1 IN1 IC input. When IN1 is high, OUT1 is high. If necessary, a capacitor (recommend 100pf) can be connected 2 OPT1 from OPT1 to COM to filter input signal noise. 3 IN2 IC input. When IN2 is high, OUT2 is high. If necessary, a capacitor (recommend 100pf) can be connected 4 OPT2 from OPT2 to COM to filter out input noise. 5 COM Common reference pin. IC output pin. Provide gate driving voltage for the rectifier 6 OUT2 MOSFET. IC output pin. Provide gate driving voltage for the 7 OUT1 freewheeling MOSFET. 8 BST A 220nf capacitor should be connected from BST to COM. 1 W2 Technology Inc. reserves the right to make changes to any content herein without further notice. W2 Technology Inc. Active Diode Driver IC Preliminary WT6003 Application circuit There is an external small toroid transformer used to sense current and provide driving signal for WT6003 chip. Top View Bottom View T1 The Active Diode Module 2 W2 Technology Inc. reserves the right to make changes to any content herein without further notice.
