ENH064V1-800 Datasheet | WEDC

Features GENERAL DESCRIPTION WEDC provides optically enhanced solutions to the standard Sharp LQ64D343 color active matrix LCD module. The ENH064V1-800 enhancement is an index matching (IM) film lamination to the front surface of the display polarizer. The IM film is available in two surface treatments - IM/Clear and IM/110 (a 10% diffusion). The second enhancement is the incorporation of an enhanced light guide (ELG) providing for up to 30% increase in brightness. This module is posed of a color TFT-LCD panel, driver ICs, control circuit and power supply circuit and a backlight unit. Graphics and texts can be displayed on a 640 x RGB x 480 dot panel with 262,144 colors by supplying 18-bit data signal (6-bit/color), four timing signals, +5V DC supply voltage for TFT-LCD panel driving and supply voltage for backlight. The TFT-LCD panel used for this module is a low-reflection and higher-color-saturation type. Therefore, this module is also suitable for multimedia use. Viewing angle is 6 o’clock direction. This module offers a wide viewing angle and high brightness (800cd/m2). Backlight-driving DC/AC inverter is not built in this module. WEDC assumes no responsibility for any damage resulting from the use of the device which does not ply with the instructions and the precautions specified in these specification sheets. WEDC does assume the responsibility for the warranty of the enhanced product. MECHANICAL SPECIFICATIONS Parameter Display Size Active Area Pixel Format Pixel Pitch Pixel Configuration Display Mode Unit Outline Dimensions (1) Mass Surface Treatment Note: 1. Excluding backlight cables. Specifications 16 (6.4") Diagonal 130.6(H) x 97.0(V) 640(H) x 480(V) (1 pixel=R+G+B dots) 0.204(H) x 0.202(V) RGB vertical stripe Normally white 175.0(W) x 126.5(H) x 16.0(D) 290 ± 20 IM/Clear (glossy) or IM/110 and hardcoat 3H Unit cm mm pixel mm - - mm g - Original specifications created by Sharp. February, 2004 Rev. 0 1 White Electronic Designs - Display...