WS2283 - Current Mode PWM Controller

WINSEMI

Key Features

Burst Mode Control.
5uA ultra-low startup current.
1.8mA Low operating current.
Built-in Leading-edge blanking.
Built-in synchronous slope compensation circuit.
Built-in Soft-Start.
65kHz fixed switch frequency.
Cycle by cycle over current protection (OCP).
VCC over voltage clamp & under voltage lockout( UVLO).
Over load protection (OLP).
OTP and OVP shut down latch.
Maximum Gate output voltage clamped at 13.8V.
Frequency jitterin.

WS2283 current mode pwm controller by WINSEMI - Datasheet Preview

Datasheet Details

Part number	WS2283
Manufacturer	WINSEMI
File Size	165.30 KB
Description	Current Mode PWM Controller
Datasheet	WS2283 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
WS220P4SMA	Power Transient Voltage Suppressor	WAYON
WS220P4SMA-B	Power Transient Voltage Suppressor	WAYON
WS22P4SMA	Power Transient Voltage Suppressor	WAYON
WS22P4SMA-B	Power Transient Voltage Suppressor	WAYON
WS22P6SMB	Power Transient Voltage Suppressor	WAYON

Other Datasheets by WINSEMI

Part Number	Description
WS2212H	Synchronous rectifier
WS2260A	Single-channel synchronous rectifier controller
WS2260C	Single-channel synchronous rectifier controller
WS2268BJ	High-performance fully integrated single-channel synchronous rectifier
WS2293A	switch-mode power supply controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

WS2283 Product Description Features ■ Burst Mode Control ■ 5uA ultra-low startup current ■ 1.8mA Low operating current ■ Built-in Leading-edge blanking ■ Built-in synchronous slope compensation circuit ■ Built-in Soft-Start ■ 65kHz fixed switch frequency ■ Cycle by cycle over current protection (OCP) ■ VCC over voltage clamp & under voltage lockout( UVLO) ■ Over load protection (OLP) ■ OTP and OVP shut down latch ■ Maximum Gate output voltage clamped at 13.