• Part: HMJ8
  • Description: High Dynamic Range FET Mixer
  • Manufacturer: WJ Communication
  • Size: 80.33 KB
Download HMJ8 Datasheet PDF
WJ Communication
HMJ8
HMJ8 is High Dynamic Range FET Mixer manufactured by WJ Communication.
Features - +37 d Bm IIP3 - No External Matching Elements - - - - - - Product Description The HMJ8 is a high dynamic range, Ga As FET mixer. This active FET mixer realizes a typical third order intercept point of +37 d Bm at an LO drive level of +18 d Bm. The HMJ8 es in a low cost, J-lead package. Typical applications include frequency up/down conversion, modulation and demodulation for receivers and transmitters used in munication systems. Functional Diagram 18 17 16 15 14 13 12 11 10 Required RF 2200-2300 MHz LO 2060-2160 MHz IF 50-150 MHz +18 d Bm Drive Level +3V Bias (22 m A) Low Cost Surface Mount J-Lead Package 1 2 3 4 5 6 7 8 9 Function Pin No. Function Pin No. Ground 1 Ground 10 IF 2 LO 11 Ground 3-7 Ground 12-16 +3V DC 8 RF 17 Ground 9 Ground 18 Specifications Parameter Frequency Range: RF LO IF SSB Conversion Loss Noise Figure Isolation: LO-RF LO-IF RF-IF IIP3 Return Loss: RF Port LO Port IF Port Input P1d B LO Drive Level DC Current at +3V Bias Units MHz MHz MHz d B d B d B d B d B d Bm d B d B d B d Bm d Bm m A Minimum 2200 2060 50 8 10.5 22 22 32 27 30 15 37 11 8.5 14 23 18 22 Typical Maximum 2300 2160 150 9.0 Condition Test conditions unless otherwise stated: RF = 2250 MHz (-10 d Bm), LO = 2110 MHz (18 d Bm), IF = 140 MHz and 25˚C. Absolute Maximum Ratings Parameter Operating Case Temperature Storage Temperature Maximum Input Power Rating -40 to +85°C -65 to +100°C 25 d Bm Ordering Information Part No. HMJ8 HMJ8-PCB Description High Dynamic Range FET Mixer (Available in tape and reel) Fully Assembled Application Circuit 1. Operation of this device above any of these parameters may cause permanent damage. 2. Total sum of LO port and RF port power should not exceed 25 d Bm. WJ munications, Inc. - Phone: 1-800-WJ1-4401 - FAX: 408-433-5649 - e-mail: sales@wj. - Web site: .wj. September 2000 Performance Charts IIP3 vs. RF Frequency 40 IF = 150 MHz 39 Conversion Loss IIP3 (d Bm) 7.4 Conversion Loss vs. RF Frequency 7.2 IF = 100 MHz 7.6 IF = 150 MHz...